Ariens IKON 52
Ariens IKON 52 Zero-Turn Mower Powered by Kawasaki
RRP: £6,820
The newest and fastest way to mow your lawn. No matter how big your garden is. The new Ariens IKON sets new standards in terms of cutting pattern, comfort and features.
The new Ariens IKON is more than just new. It’s not just different form its predecesor. The new IKON opens up a new class of mower for the private and semi-professional user.
AriensCo’s 90th anniversary kicked off the revision of the Ariens Ikon family of zero turns – all of the accumulated experience from previous years have been incorporated into this ground-up, complete re-design of the Ariens Ikon.
Our design engineers have looked at every component. Tried and tested components have been retained and everything else has been revised, improved or renewed. The new Ariens IKON is difficult to categorise. It blurs the line between a mower for private users and a professional mower. The industry leading design and performance will set it apart from the rest. Discover it… for yourself!
Features:
Stability and durability:
As with the professional series, the IKON has a fully welded tubular frame.
Power reserves and reliability
The Kawasaki® FR engine series on the IKON is the top benchmark in its class. It delivers the power and performance needed in the toughest conditions.
Carefree wheel drive
The two separate hydrostatic EZT® wheel motors from HYDRO-GEAR® are service-free and guarantee a smooth driving experience.
New ENVY mower deck
The mowing deck is the most heavily loaded component of a mower. Stability is particularly important here: The new ENVY mower deck has improved air flow and an enlarged discharge. Lying grass is lifted higher and cut perfectly. With 4-point suspension for permanent fixation and parallelism. Furthermore, Blade spindles made of forged aluminium. Cooler running and more impact and vibration
resistant than cast spindles. Standard in the course of the 2025 season on APEX and ZENITH & the new IKON.
Specification:
Motor: Kawasaki® FR691 V-Twin OHV
Engine Displacement: 726cc
Deck Configuration: Side Discharge / Mulching Optional
Deck Material: 11 ga steel
Deck Construction: Fabricated
Number of Spindles: 3
Blade Tip Speed: 17,000 fpm / 86.4 m/s
Spindle Bearings: Sealed
Cutting Width: 132 cm / 52"
Cutting Height Min: 3.8 cm / 1.5"
Cutting Height Max: 11.4 cm / 4.5"
Wheels Front Axle: Fixed
Seat: High Back w/ Armrests
Hour Meter: Standard
Warranty Machine: 3 Year / 300 Hours
Drive Type: Hydro-Gear® EZT Transaxles
Fuel Capacity: 13.2 ltr
Ground Speed: Forward 11.2 kph / 7 mph
Ground Speed: Reverse 4.8 kph / 3 mph
Spindle Material: Steel
Spindle Shaft: Steel
Deck Drive: Belt
Deck Engagement: Electric Warner Clutch
Deck Lift System: Foot Operated
Cutting Positions: 13
Wheels Front: 11 x 6-5
Wheels Rear: 20 x 8-8
Weight: 309 kgs
Ariens IKON 52 Zero-Turn Mower Powered by Kawasaki
RRP: £6,820
The newest and fastest way to mow your lawn. No matter how big your garden is. The new Ariens IKON sets new standards in terms of cutting pattern, comfort and features.
The new Ariens IKON is more than just new. It’s not just different form its predecesor. The new IKON opens up a new class of mower for the private and semi-professional user.
AriensCo’s 90th anniversary kicked off the revision of the Ariens Ikon family of zero turns – all of the accumulated experience from previous years have been incorporated into this ground-up, complete re-design of the Ariens Ikon.
Our design engineers have looked at every component. Tried and tested components have been retained and everything else has been revised, improved or renewed. The new Ariens IKON is difficult to categorise. It blurs the line between a mower for private users and a professional mower. The industry leading design and performance will set it apart from the rest. Discover it… for yourself!
Features:
Stability and durability:
As with the professional series, the IKON has a fully welded tubular frame.
Power reserves and reliability
The Kawasaki® FR engine series on the IKON is the top benchmark in its class. It delivers the power and performance needed in the toughest conditions.
Carefree wheel drive
The two separate hydrostatic EZT® wheel motors from HYDRO-GEAR® are service-free and guarantee a smooth driving experience.
New ENVY mower deck
The mowing deck is the most heavily loaded component of a mower. Stability is particularly important here: The new ENVY mower deck has improved air flow and an enlarged discharge. Lying grass is lifted higher and cut perfectly. With 4-point suspension for permanent fixation and parallelism. Furthermore, Blade spindles made of forged aluminium. Cooler running and more impact and vibration
resistant than cast spindles. Standard in the course of the 2025 season on APEX and ZENITH & the new IKON.
Specification:
Motor: Kawasaki® FR691 V-Twin OHV
Engine Displacement: 726cc
Deck Configuration: Side Discharge / Mulching Optional
Deck Material: 11 ga steel
Deck Construction: Fabricated
Number of Spindles: 3
Blade Tip Speed: 17,000 fpm / 86.4 m/s
Spindle Bearings: Sealed
Cutting Width: 132 cm / 52"
Cutting Height Min: 3.8 cm / 1.5"
Cutting Height Max: 11.4 cm / 4.5"
Wheels Front Axle: Fixed
Seat: High Back w/ Armrests
Hour Meter: Standard
Warranty Machine: 3 Year / 300 Hours
Drive Type: Hydro-Gear® EZT Transaxles
Fuel Capacity: 13.2 ltr
Ground Speed: Forward 11.2 kph / 7 mph
Ground Speed: Reverse 4.8 kph / 3 mph
Spindle Material: Steel
Spindle Shaft: Steel
Deck Drive: Belt
Deck Engagement: Electric Warner Clutch
Deck Lift System: Foot Operated
Cutting Positions: 13
Wheels Front: 11 x 6-5
Wheels Rear: 20 x 8-8
Weight: 309 kgs
Ariens IKON 52 Zero-Turn Mower Powered by Kawasaki
RRP: £6,820
The newest and fastest way to mow your lawn. No matter how big your garden is. The new Ariens IKON sets new standards in terms of cutting pattern, comfort and features.
The new Ariens IKON is more than just new. It’s not just different form its predecesor. The new IKON opens up a new class of mower for the private and semi-professional user.
AriensCo’s 90th anniversary kicked off the revision of the Ariens Ikon family of zero turns – all of the accumulated experience from previous years have been incorporated into this ground-up, complete re-design of the Ariens Ikon.
Our design engineers have looked at every component. Tried and tested components have been retained and everything else has been revised, improved or renewed. The new Ariens IKON is difficult to categorise. It blurs the line between a mower for private users and a professional mower. The industry leading design and performance will set it apart from the rest. Discover it… for yourself!
Features:
Stability and durability:
As with the professional series, the IKON has a fully welded tubular frame.
Power reserves and reliability
The Kawasaki® FR engine series on the IKON is the top benchmark in its class. It delivers the power and performance needed in the toughest conditions.
Carefree wheel drive
The two separate hydrostatic EZT® wheel motors from HYDRO-GEAR® are service-free and guarantee a smooth driving experience.
New ENVY mower deck
The mowing deck is the most heavily loaded component of a mower. Stability is particularly important here: The new ENVY mower deck has improved air flow and an enlarged discharge. Lying grass is lifted higher and cut perfectly. With 4-point suspension for permanent fixation and parallelism. Furthermore, Blade spindles made of forged aluminium. Cooler running and more impact and vibration
resistant than cast spindles. Standard in the course of the 2025 season on APEX and ZENITH & the new IKON.
Specification:
Motor: Kawasaki® FR691 V-Twin OHV
Engine Displacement: 726cc
Deck Configuration: Side Discharge / Mulching Optional
Deck Material: 11 ga steel
Deck Construction: Fabricated
Number of Spindles: 3
Blade Tip Speed: 17,000 fpm / 86.4 m/s
Spindle Bearings: Sealed
Cutting Width: 132 cm / 52"
Cutting Height Min: 3.8 cm / 1.5"
Cutting Height Max: 11.4 cm / 4.5"
Wheels Front Axle: Fixed
Seat: High Back w/ Armrests
Hour Meter: Standard
Warranty Machine: 3 Year / 300 Hours
Drive Type: Hydro-Gear® EZT Transaxles
Fuel Capacity: 13.2 ltr
Ground Speed: Forward 11.2 kph / 7 mph
Ground Speed: Reverse 4.8 kph / 3 mph
Spindle Material: Steel
Spindle Shaft: Steel
Deck Drive: Belt
Deck Engagement: Electric Warner Clutch
Deck Lift System: Foot Operated
Cutting Positions: 13
Wheels Front: 11 x 6-5
Wheels Rear: 20 x 8-8
Weight: 309 kgs
